Best 16 port switches by NETGEAR reviewed
A good network switch ensures efficient communication between the computers across the network. Being a network administrator for almost 15 years I had used and configured switches by various brands but from all those NETGEAR switches are my personal favorite. Few of reasons I prefer them over others is because of their ease of configuration. NEATGEAR switches are highly suitable for extendible networks, due to builtin security features they are very less prone to intrusion. Either if you wanted to created VLAN’s on managed switches or you want to add nodes instantly om open ports using Unmanaged switches, NETGEAR provides the complete range of switches. Whichever switch you chose to buy its better that you also purchase a protection plan for the devices specially if you are planning to buy a renewed NETGEAR switch. I also like to thank you guys for appreciating my related post about network routers that have embedded print server. Now I would not take your further time and her eis your list.
NETGEAR GS316 16-Port Gigabit Unmanaged switch
This product is specially designed for those who want to expand their Ethernet ports and don’t care to mess with technical settings, this is the Ethernet switch/expanded for you. Modem, WiFi Router, NETGEAR 16-Port Gigabit Ethernet Switch. All your devices (up to 15 of them) will get their IP address from the WiFi Router. This is a gigabit switch and cat8 would more typically be used for 10 GB networking but it is all compatible. It has 16 Gigabit ports, a very simple setup with no software to install or configuration needed. It supports desktop or wall-mount placement. The fan-less design means zero added noise wherever it is located, making it ideal for noise-sensitive environments. This is specially designed to optimize power usage (12 volts) lowering its cost to operate. The Unit is solidly constructed with 3 years warranty.
The Ethernet ports on the front are very sturdy, and the light indicators make it easy to see what’s connected at a glance. Speed testing shows little to no impact on network speeds, even with all 16 ports in use. Each port has a green light which is steady, if it’s live, but flashes when data is being transferred.
When you turn the connected device off, the light goes out.
From a performance, reliability, construction aspect, it’s unmatchable. It will serve a wired connection to your internet provider’s modem for all of your main hardware. It has a 50ft Cat6 Ethernet cable running from your modem to this switch and it will provide the perfect “Unmanaged” solution for a connection to your desktop, Xbox and Plex PC.
For this price, with this many ports, it’s unbeatable. It has an elegantly designed metal casing and builds quality. This empowers growing small businesses with basic capabilities to configure, secure, and monitor their network beyond simple connectivity at an affordable cost and an ideal upgrade from Unmanaged switches. This is an ideal choice for homes, small and medium businesses,es and enterprises. This is fully managed, an affordable, powerful, and future-proof networking infrastructure designed for enterprise and campus networks, with core and edge networking, and AV-over-IP solutions. It also includes integrated security, high availability, delivery optimization, and enhanced manageability.
NETGEAR JGS516 16-Port Gigabit Ethernet Unmanaged Switch
Why buy a second-class product when you can have a top-quality product at a great price and with the best warranty around? The NETGEAR JGS516 unmanaged Switch is designed for desktop or rack mount and features 16-Port Gigabit Ethernet, ProSAFE Lifetime Protection, and more. It has 16 gigabit ports and a very simple setup with no software to install or configuration needed. The fan-less design means zero added noise wherever it is located, making it ideal for noise-sensitive environments. It is designed to optimize power usage lowering its cost to operate.
This switch is designed to handle Gigabit speeds. It sounds like we need a little background. Cat 5 is a network category that is “certified” to handle 100BASE-T (100Mbps) speeds. Cat 6 is “certified” to handle 1000BASE-T (1000 Mbps or 1 Gbps or 1 Gigabit). This switch supports Gigabit speeds (cat 6). The issue you need to be aware of is that to achieve Gigabit speeds all the components and equipment must be certified to handle Gigabit speeds so, your computer, the network card, your cabling, switches, routers, etc., ALL must be certified for Gigabit speeds otherwise your network will only be as fast as the slowest piece of equipment/hardware. This is easy to set up and deliver the expected increase in speed to all devices. This switch has an awesome design, you definitely like its modern look. The price point on it is really good as well. So easy to install, the installation is so much neater. Just plug and play, no setup required. This switch is the perfect choice for anyone who is running more than one computer in the house. The switch brings quality and stability to your internet connection and speed, and it also adds another layer of safety. They work well and last without any issues. This is good for anyone that uses more than one device at one time.
If you want to buy switches based on the product quality, performance, and great customer support, Netgear is the best choice for this. They stand behind their lifetime warranty. Great quality product. Top-quality with good support and a great warranty.
NETGEAR GS116E 16-Port Gigabit Managed Plus Switch
If you want something rack-mountable, lots of extra ports for cheap, gigabit speeds, some more advanced switching features at a cheap price and you want to use wired connections for the TV, DVD player, DVR, printer, a storage device for local back-ups, your offices’ docking stations, the solution is NETGEAR 16-Port Gigabit Ethernet plus Switch (GS116E). It has 16 Gigabit ports and has Management software with an easy-to-use GUI interface that offers basic capabilities to configure, secure, and monitor your network. It supports desktop or wall-mount placement. This is fan-less, the fan-less design means zero added noise wherever it’s located, making it ideal for noise-sensitive environments with a lifetime limited hardware warranty.
The router that connects to the Internet manages QoS (Quality of Service for Voice), Video, and Data prioritization, if you aren’t sure about this, let the router figure it out for you, no worries at all. VLANs (Virtual LANs) if you use them, are nice for wireless connections to have a special network just for visitors in your home, so they only have access to the Internet lest you want them to interact with your stuff like gaming or movies or whatever. The router manages IP address allocations via DHCP. This is handy for video security, so you run one wire and if you have power and your video cam has wireless, be sure to use encryption to secure your video feed.
This product is perfect for someone that needs that extra management ability because of VoIP or other networking needs but doesn’t need or want to get into full layer 3 switching. The web interface is easily learned and accessible. You can lock it down as well. NETGEAR has been really good about product support as well and they fix issues fast with firmware updates as needed.
This managed switch is lightweight, and has no fans, designed to minimize fan noise to protect your business or home environment. It’s just a switch after all. Again, it’s a problem with bigger routers, but not with this one. This switch exceeds the high standards required for stable and robust network infrastructure and it has software with an easy-to-use GUI interface that offers basic capabilities to configure, secure, and monitor your network.
NETGEAR GS716Tv3 16-Port Gigabit managed Switch
The NETGEAR GS716Tv3 Managed Pro Switch is designed for desktop or rack mount, features 16-Ports of Gigabit Ethernet, 2 x 1G SFP ports, ProSAFE Lifetime Pro. It has 16 Gigabit ports, Management software with easy-to-use GUI interface offers refined control for secure setup, access, and SNMP (NMS 300) management. Under the price tag of 200 dollars it is one of the best managed switch you can add to your network.It Supports desktop or rack mount placement, and includes all the necessary mounting hardware in the box, The fan-less design means zero added noise wherever its located, making it ideal for noise-sensitive environments and it has Lifetime Limited Hardware Warranty.its plug and play solution to connect all your network devices without the complications of configuration or management software. This is an ideal upgrade from unmanaged switches. This is also ideal for larger organizations requiring advanced configuration and refined control for 22 setup, access, and management of complex business networks. This also Supports the needs of edge networking and automated management of prioritized voice, video, and data traffic. This is an inexpensive, great, and future-proof networking setup designed for enterprise and campus networks, with core and edge networking, and AV-over-IP solutions. These are pretty strong switches and quite easy to configure. No matters, if you have zero experience with VLANs or LAGs, after a bit of reading, can enable you to configure it all yourself. You will find the default settings on these switches are pretty much right where most users need to be. These support STP, RSTP, and MSTP. By default, they’re all set to RSTP and it just works.
Aside from the affordable price, this switch provides just the right accessibility of control for a small business, or a home-based business with networking. The Setup is simple enough. Although the switch has a static IP by default. The Web console is intuitive enough for a techie and offers a sufficient level of control and monitoring for most businesses. You don’t need to do anything except plug in the cables and accept the defaults, which are sensible enough. If you don’t have any need for advanced QOS, the defaults should work fine.The switch also includes both rack-mounting brackets and rubber feet for desktop use.
All in all, this looks like a very capable switch at a very affordable price. Its Works straight out of the box, and with the Smart Control Center application, it’s simple to set the IP address and password to get the network switch in use ASAP.
NETGEAR XS716E 16-Port 10G Ethernet Plus switch
This NETGEAR 16-Port 10G Ethernet Plus has 16 10G ports, 240 Volts, and has Management software with an easy-to-use GUI interface that offers basic capabilities to configure, secure, and monitor your network, maximizes your performance today, and future-proofs your network’s bandwidth for tomorrow. Many models offer multi-gig support for higher speeds on existing CAT5e cabling. It Supports desktop or rack mount placement, and includes all the necessary mounting hardware in the box. This also reduces fan noise to protect your home office or business environment. You will get the industry-best Lifetime Limited Hardware Warranty.
This switch is an energy saver, designed to optimize power usage lowering its cost to operate. This switch Provides fully-integrated management, visibility, and control from any device, anywhere. It supports 802.11ad link aggregation (LACP). Your client device will also need to support 802.11ad to create the 20 Gbps pipe. While the unit is capable of bonding the two 10GbE ports, there may be some strange performance interactions if different media (10GBase-t vs. Direct-attach copper or Fiber) are used. For most consistent results, use the same type of media for all links in a bonded connection.
Conclusion
Our review team has physically evaluated each of these 16 port NETGEAR switches. All of these Gigabit switches, either managed or unmanaged will ease your life as network administrator. Let m know about your choice and any drawbacks of these switches.
